It is designed for the packaging of solid objects and is suitable for packaging all kinds of solid and regular objects, such as food biscuits, bread, moon cakes, candies, etc., as well as daily necessities, industrial parts, etc. object. It adopts the common electric furnace wire heating method, which is characterized by fast heating, good stability and low maintenance cost.

Model: FW-150/250/320/450/600

The automatic operation of the film sealing and cutting packaging machine is widely used in the flow operation of mass production and packaging, with high work efficiency, automatic film feeding and punching, automatic film sealing and cutting, and automatic winding of waste; only need to manually adjust the film guide system and manually adjust the feeding. Material conveying platform, suitable for products of different widths and heights. It can be used with automatic packaging line.

Model: FQL/FQB-450/550/650/750…

Using quartz far-infrared tube heating, electronic stepless automatic temperature adjustment, solid state relay control, stable and reliable, low noise, long life. The packaged product can be sealed, moisture-proof and impact-proof, and is suitable for inner tight packaging and pallet packaging of multiple items.

Model: BS-4020/4522/4525/5530/6530…

Buying advice
Troubleshooting

1. Determine which products you want to pack in the packaging machine you will buy. Some packaging machinery manufacturers have many varieties of products. When purchasing a packaging machine, they hope that one piece of equipment can pack all their varieties. In fact, the packaging effect of special machines is often better than that of compatible machines. It is best not to pack more than 3-5 varieties in one packaging machine. In addition, products with large differences in external dimensions should be packaged separately as much as possible.
2. High cost performance is your first principle. At this stage, the quality of domestically produced packaging machines has been greatly improved, especially for pillow packaging machines. The proportion of exports has been largely exported, so the quality of imported machines can be purchased at the price of domestic machines. Buy what is right, not what is expensive.
3. Choose a famous brand packaging machine company with a long history, and the quality is guaranteed. Choose models with mature technology and stable quality to make packaging faster and more stable, with low energy consumption, low manual work, and low scrap rate. The packaging machine is a talent-consuming machine. If you buy a low-quality machine, the packaging film that will be wasted in the daily production in the future will not be a small amount.
4. Choose simple operation and maintenance, complete accessories, automatic continuous feeding mechanism, which can improve packaging efficiency and reduce labor costs, which is suitable for the long-term development of enterprises.

1. The temperature is too high and the speed is too slow. When the heat resistance of the outer layer of the coating is poor, there will be traces of scorch wrinkles on the seal. The repair method is to increase the speed, reduce the temperature, and replace the film material.
2. The knife seat is too high or too low, the packaging speed is too fast, and when the push rod and the cutter are not synchronized, the cutter will cut on the product. The maintenance method is to reduce the packaging speed and adjust the height of the end sealing parts, so that the center of the sealing knife is at the center of the product. The middle position of the product height.
3. The color of the film color code is too light, the film drive is slippery, and the cutting position will deviate from the color code when the color code tracking is not turned on. At this time, the maintenance method is to refer to the packaging machine manual and adjust its sensitivity; in the man-machine dialogue interface, Switch the tracking mode to “Track Cut”.
4. The solid-state circuit breaker is burned out, the temperature control meter is damaged, and the thermometer cannot control the temperature when the thermocouple is damaged. The maintenance method is to replace the galvanic couple, replace the temperature control meter (see Figure 1), and replace the heating element.
5. The speed is too fast, the heat sealing property of the inner layer of the coating is poor. When the temperature is too low, the sealing will be leaked or not firm. The maintenance method is to slow down the speed, increase the temperature, and replace the material of the film.
6. The air pressure is wrong, the cylinder swing rod is loose, the heating temperature is low, and the heat seal is not good when the hot pressing roller and the transmission roller are not parallel. The maintenance method is to adjust the parallelism, adjust the temperature and air pressure to tighten it.